Code P0244 reports an incorrect target value in the boost pressure limiting circuit. On the Fiat 500 900 TwinAir it shows up as a severe loss of power and the messages ‘Start&Stop unavailable’ and ‘Have the engine checked’.
- System
- Fuel injection
- Component
- Intercooler hose, intake side
- Fault
- The engine warning light comes on with a severe loss of power and the messages ‘Start&Stop unavailable’ and ‘Have the engine checked’ on the display.
- Typical symptoms
-
- Engine warning light on
- Severe loss of power
- ‘Start&Stop unavailable’ message
- ‘Have the engine checked’ message on the display
- Vehicles affected
-
- Fiat 500 900 TwinAir
- Main code
-
- P0244 Boost pressure limiting circuit 1, incorrect target value
- Solution
-
See the repair procedure verified on Sema Repair.
The cause and the repair are on Sema Repair
On Sema Repair every code is linked to verified fault cases. The case study gathers, where available, the information you need to reach the repair:
- Verified cause of the fault
- Step-by-step repair procedure
- Indicative repair times
- Manufacturer's notes
- Photo of the component with the repair point marked