Code P0102 reports a low reading from the mass air flow sensor. On the Fiat 500X 1.3 Multijet it lights the engine warning light without affecting how the vehicle runs.
- System
- Fuel injection
- Component
- Engine air filter housing
- Fault
- Engine warning light on and the vehicle running correctly.
- Typical symptoms
-
- Engine warning light on
- The vehicle runs correctly
- Vehicles affected
-
- Fiat 500X 1.3 Multijet
- Main code
-
- P0102 Mass air flow sensor, low reading
- Solution
-
See the repair procedure verified on Sema Repair.
The cause and the repair are on Sema Repair
On Sema Repair every code is linked to verified fault cases. The case study gathers, where available, the information you need to reach the repair:
- Verified cause of the fault
- Step-by-step repair procedure
- Indicative repair times
- Manufacturer's notes
- Photo of the component with the repair point marked
Frequently asked questions about P0102
The vehicle runs fine: can P0102 be ignored?
No. The code keeps the engine warning light on, and with that light on the vehicle will not pass its MOT test. Not feeling it while driving does not mean it is not there.
Is it worth replacing the mass air flow sensor?
The code reports a low value, not a failed sensor: if less air than expected reaches the sensor, the reading is low while still being correct. On the Fiat 500X 1.3 Multijet the documented case concerns what sits upstream of the sensor.
Does cleaning the sensor help?
In this case no: the sensor is measuring correctly, and cleaning it does not change the value it reads.