Code C2280 reports incorrect EDA current performance. On the Fiat 500X 2.0 Multijet it appears together with several braking system codes, with a ‘Have the electric parking brake checked’ message and Start&Stop inactive.
- System
- Electronics
- Component
- Battery
- Fault
- Several messages on the display, including ‘Have the electric parking brake checked’, with the corresponding warning light permanently on and the Start&Stop system inactive.
- Typical symptoms
-
- ‘Have the electric parking brake checked’ message
- Handbrake fault light permanently on
- Start&Stop unavailable messages
- Start&Stop system inactive
- Vehicles affected
-
- Fiat 500X 2.0 Multijet
- Main code
-
- C2280 EDA current, incorrect performance or operation
- Related codes
-
- B106D Driving style system, invalid signal
- C1252 CCM signal fault, invalid signal
- C2080 Motor 1, faults
- C2100 Motor 1, faults
- C2120 Motor 2, faults
- C221B Implausible signal, brake control unit
On this fault the diagnostic tool often returns several codes together.
- Solution
-
See the repair procedure verified on Sema Repair.
The cause and the repair are on Sema Repair
On Sema Repair every code is linked to verified fault cases. The case study gathers, where available, the information you need to reach the repair:
- Verified cause of the fault
- Step-by-step repair procedure
- Indicative repair times
- Manufacturer's notes
- Photo of the component with the repair point marked